Rebranding Instructions

FunkyHuawei allows you to rebrand (change the model and region) of all recent Huawei phones, by using our FunkyHuawei Rebrand Tool (FHRebrandTool).

Warning: Do not try to rebrand the USA version Mate 10 Pro/Porsche (BLA-A09) to another branding. You might brick your device. Other Mate 10 Pro (BLA-L09 and BLA-L29) are ok to rebrand.

Warning: EMUI 8.1 devices not supported. EMUI 8.0 and below only for now.

For rebranding the Mate RS, P20, and P20 Pro, please use this tool. P20 Lite/Nova 3S support is coming but not available yet.

Note: This tool is not currently working for Mate 10/Mate 10 Pro on June 2018 security patch. Please make sure you have an older security patch before using.

Note: If your model is older or uses a non-Kirin processor, this tool may not work for you. Please ask our support if your device is compatible. We can't be responsible or provide refunds for usage of this tool with incompatible devices.

Note: Before using the tool, please make sure that firmware for the model and branding you are choosing actually exists. If in doubt, contact us beforehand.

Note: In some cases, FHRebrandTool will write a dummy IMEI to your oeminfo (branding) partition which can be seen when using certain fastboot commands. However, your phone's actual IMEI does not change. It enables dual-sim functionality on some single-sim phones but does not give your phone a second IMEI. If concerned, please confirm your phone's actual IMEI by dialing *#06#

Note: Due to changes in the Mate 10, Mate 10 Pro, and Honor V10, rebranding with FHRebrandTool can cause your bootloader unlock code to change.


  1. Buy credits. Make sure you have at least 7 credits in your account.
  2. Make sure your phone is in working condition.
  3. If you are on Windows 10 and you have a Mate 10 or Mate 10 Pro, use this fix..
  4. Download FHRebrandTool from here.
  5. Extract the ZIP file onto your computer's disk.
  6. Turn off your phone.
  7. While holding the volume down button on your phone, connect the USB cable from your phone to your computer.
  8. Open FHRebrandTool.exe
  9. Choose the model of phone you wish to rebrand to. If it is not listed, choose Option 7 and enter it manually.
    Manual entry examples: BKL-L09 for international Honor V10. MHA-AL00 for Chinese Mate 9. BLA-L09 for Single-Sim Mate 10 Pro.
    If you don't know what to enter here, you can contact us.
  10. Choose the region of the phone you wish to rebrand to. If it is not listed, choose Option 8 and enter it manually.
    Manual entry examples: porsche/normal for Porsche Mate 9/10 Pro. vodafone/es for Vodafone Spain.
    If you don't know what to enter here, you can contact us.
  11. Follow the instructions on the screen, confirm that everything is right and type OK and press enter.
  12. After a short wait, your phone will be rebranded. Note that in About Phone, the correct information will not be displayed until you follow the next step...
  13. Now, follow the installation instructions to install firmware matching your new branding.
    You may need to install TWICE. Please use eRecovery method.
  14. You may see some errors upon boot asking you to do a data format and so on. Please do the data format.
  15. If your phone does not boot after the procedure, unplug the usb cable and boot your phone while holding Volume Up to get into recovery. Then choose wipe data, and choose wipe cache. Then your phone will boot.

WARNING: Due to some differences with the Honor V10 / View 10 and other models, we have a separate tool for that device.
Please see here (Only applicable to Honor V10 / Honor View 10 / BKL model.)

FHRebrandTool download »
FHRebrandTool instructions »

Here is a video of the process (old way, some things have changed), thanks to TK Bay