Rebranding Instructions (Honor V10)

FunkyHuawei allows you to rebrand (change the model and region) of the Honor V10/View 10 with this tool.

Note: Before using the tool, please make sure that firmware for the model and branding you are choosing actually exists. If in doubt, contact us beforehand.

Note: In some cases, FHRebrandTool will write a dummy IMEI to your oeminfo (branding) partition which can be seen when using certain fastboot commands. However, your phone's actual IMEI does not change. It enables dual-sim functionality on some single-sim phones but does not give your phone a second IMEI. If concerned, please confirm your phone's actual IMEI by dialing *#06#

Note: Due to changes in the Mate 10, Mate 10 Pro, and Honor V10, rebranding with FHRebrandTool can cause your bootloader unlock code to change.

Instructions:

  1. Buy credits. Make sure you have at least 7 credits in your account.
  2. Make sure your phone is in working condition.
  3. If you are on Windows 10, use this fix..
  4. Download FHRebrandTool for Honor V10 from here.
  5. Extract the ZIP file onto your computer's disk.
  6. Turn off your phone.
  7. While holding the volume down button on your phone, connect the USB cable from your phone to your computer.
  8. Open FHRebrandToolHonorV10.exe
  9. Choose the model of phone you wish to rebrand to.
  10. Choose the region of the phone you wish to rebrand to. If it is not listed, choose Option 8 and enter it manually.
  11. Note: For the all/cn region, please choose BKL-AL00 or BKL-AL20. For all other regions please choose BKL-L09.
  12. Follow the instructions on the screen, confirm that everything is right and type OK and press enter.
  13. After a short wait, your phone will be rebranded. Note that in About Phone, the correct information will not be displayed until you follow the next step...
  14. Now, follow the installation instructions to install firmware matching your new branding.
    You may need to install TWICE. Please use eRecovery method.
  15. You may see some errors upon boot asking you to do a data format and so on. Please do the data format.
  16. If your phone does not boot after the procedure, unplug the usb cable and boot your phone while holding Volume Up to get into recovery. Then choose wipe data, and choose wipe cache. Then your phone will boot.

FHRebrandToolBKL download »